Wash off the green, then refill every joint
Paver Cleaning and Joint Sand in Fort Caroline, FL
Call (904) 637-8112 for a free estimate to clean and re-sand the pavers at your Fort Caroline home.
- Brings out deeper paver color
- Fresh joint sand helps lock pavers in place
- Gives weeds less room to grow
- Makes the surface easier to keep clean
- Free estimate, no obligation
Request a Free Estimate
Free, no obligation.
Can I get my pavers cleaned in Fort Caroline without a long wait?
A local contractor cleans pavers across Fort Caroline, FL, and you will hear back within 1 business day, usually much sooner. New joint sand is part of the job, and the free estimate comes with no pressure to book. To start, call (904) 637-8112.
Cleaning lifts the mildew, pollen film, rust and grime that dull pavers, so the surface looks brighter and grips better underfoot. New sand then goes into the joints, which locks pavers in place and gives weeds less room. The back patio under the oaks that went dark over the summer can match the rest of the yard again. Name the worst spots to the contractor when you book your free estimate.
Paver Sealing Fort Caroline Is Proud to Serve Northeast Florida
What is part of a paver cleaning job?
Expect stain treatment, a gentle wash and new joint sand once everything dries. You can book it by itself or as the opening stage of a sealing job. Shaded walks and spots near sprinkler heads usually take the most time. To line up a cleaning, call (904) 637-8112.
Stain treatment
A cleaner matched to the problem, whether mildew, rust or oil, goes on first and is tested on a small spot.
Gentle wash
A surface cleaner on a low setting gives an even pass without blasting sand out of the joints.
Fresh joint sand
Dry, clean sand is swept into every gap once the pavers have dried, then compacted.
Sealer if you want it
Sealer can follow when the surface is fully dry. The sealing guide covers what it adds.
What are the signs my pavers need cleaning?
Signs include a green or black film on shady edges, a yellow coat of pollen, orange marks near sprinklers, weeds in the joints and sand on the driveway after rain. Mildew leads that list, because a slick walk or pool deck is a fall risk. To have yours looked at, call (904) 637-8112.
Is cleaning enough, or should I seal my pavers too?
A cleaning improves how pavers look now, while a sealer coat decides how long the look holds. Stopping at a cleaning costs less now, but mildew, rust and fading return on their own schedule. A coat makes the next cleaning easier and needs renewing every few years. Tell the contractor if you want a coat as well when you book your free estimate.
How often should Fort Caroline pavers be cleaned?
Family Handyman says shaded pavers need a thorough cleaning every year, while sunny ones may go several years. That matters here, since a Jacksonville washing company says river humidity keeps mildew returning around east Arlington. A walk under oaks may need a yearly wash, and an open driveway can wait longer. To build a cleaning routine around your yard, call (904) 637-8112.
Does a harder blast clean pavers better?
No. Unilock warns that wrong pressure or nozzle settings can crack pavers or blow sand out of the joints, and says to spray at no more than 30 degrees. A surface cleaner held at an even height gives a steadier result, and a cleaner matched to each stain does the lifting. Ask what setting the contractor plans to use when you book your free estimate.
A Jacksonville washing company adds that more pressure makes rust stains worse. If your yard drains toward a storm drain or pond, ask where the wash water goes too. To ask those questions now, call (904) 637-8112.
What is the white film on my pavers?
A chalky white film is most likely efflorescence, natural calcium salts that rise out of concrete. Unilock says it is harmless and only affects looks, and that it can return where water keeps getting in, such as from poor drainage. It must be gone before sealing, and waiting two to three months, or up to a year, confirms that. If you cannot tell it from old sealer, show it to the contractor when you call (904) 637-8112.
What is the orange staining near my sprinklers?
Rust is the usual cause. A Jacksonville washing company says rust marks need their own treatment, and that raw pressure only makes them worse. A rust remover made for pavers lifts them, and they must be gone before sealer goes on. Point out the spots when you book your free estimate.
Which paved areas can be cleaned at a Fort Caroline home?
Any paved spot at your house can be cleaned, including the driveway, pool deck, patio and front walk. Each collects a different kind of grime, so the cleaner and method change. To start with yours, book your free estimate.
Driveways
Tires and oil land here first, and the middle of a driveway takes the most sun. Cleaning the driveway keeps the color even and the joints full under the weight of a car.
Pool decks and screened lanais
Splash water, chlorine and bare feet wear a pool deck in their own way. Cleaning a deck near water should leave footing that is still safe when wet.
Patios under oak shade
A patio under big oaks stays damp and grows green early. Cleaning a shaded patio is mostly about clearing that growth and slowing it down.
Front walks and entries
Soil, mulch and sprinkler runoff stain the narrow walk to the door. Cleaning the walk is a small job that every visitor notices.
What does paver cleaning cost in Fort Caroline?
One Jacksonville company lists cleaning from $0.22 per square foot, and says the final price turns on the size of the area, the kind of paver and any sand needed in the joints. That puts a 600 square foot driveway near $132 and a 1,000 square foot pool deck near $220 to start. A 2026 Jacksonville guide puts new joint sand at $0.25 to $0.75 per square foot. For a price on your property, book your free estimate.
Planning to seal as well? Ask for one combined price. Another Jacksonville company publishes $1.75 to $3.25 per square foot for the full clean, sand and seal. To compare the two prices with a person, call (904) 637-8112.
Want the pavers protected too? Read about sealing your pavers, look through the places served or return to Fort Caroline paver sealing.
| Paved area | Cleaning from | Full clean, sand and seal |
|---|---|---|
| 500 sq ft | $110 | $875 to $1,625 |
| 900 sq ft | $198 | $1,575 to $2,925 |
| 1,400 sq ft | $308 | $2,450 to $4,550 |
Cleaning figures multiply the $0.22 per square foot starting rate that one Jacksonville company lists. The last column uses the $1.75 to $3.25 per square foot range another company published, read in November 2026. Large areas often cost less per foot, and your quote may differ.
Why use an east side contractor for paver cleaning?
A contractor who works around Arlington knows what shade, river air and pollen leave behind. Compare the quote with the published rates on this page, then decide when you are ready. To begin, book your free estimate.
A company that knows the east side
A contractor who works around Arlington has seen how shade, river air and summer rain treat pavers. Your first visit goes faster because of it.
Nothing to pay for a number
The visit and the estimate are free. If the price does not suit you, say no and you owe nothing.
Published rates to compare
Local companies publish their rates per square foot, and the ranges are listed on this site. If a bid lands far outside them, ask why.
You set the pace
Ask for the price in writing and take your time. The contractor standards page lists what to confirm first.
Want a free estimate to clean your Fort Caroline pavers?
Use the form or phone, and a contractor answers within 1 business day, usually much sooner.
Free, no obligation
What do cleaned pavers look like around Fort Caroline?
How does the paver cleaning process go, step by step?
If you skip sealer, the visit wraps up after step four, when the joints are full. To set a date, call (904) 637-8112.
1. Measure and inspect
The contractor measures the area to price the cleaning job. They note low spots, loose pavers, old sealer and places where water collects.
2. Cover and clean
Plants, outlets and windows get protected. A surface cleaner washes the pavers evenly, and rust or oil gets its own treatment.
3. Rest the surface
Cleaned pavers need time to dry. Sealing over a damp surface can turn the finish milky, so the contractor waits.
4. Pack the joints
Kiln dried sand is swept in and compacted, then the extra is cleared off the faces of the pavers.
5. Seal and walk it with you
When sealer is part of the job, it goes on thin and any puddles get rolled out. The contractor then walks the area with you and says how long to stay off it.
Frequently Asked Questions
Is it a good idea to pressure wash pavers?
Yes, on a low setting. Unilock, a paver maker, says to keep the spray at no more than 30 degrees so joint sand stays in place. It warns that wrong settings can crack pavers or blow out the joints. A surface cleaner gives a more even result than a bare wand.
What is the most effective way to clean patio pavers?
Treat the stain first, then wash gently. A Jacksonville company uses a surface cleaner and a separate treatment for rust or oil. For the white film called efflorescence, Unilock suggests dish soap, water and a stiff plastic brush, never a wire brush.
How do you sand and seal pavers?
Clean first, then sweep kiln dried sand into the joints and compact it. One Jacksonville company lets the surface dry for one to two hours, floods the joints with sealer and rolls out any puddles. Sealing a damp surface can turn the finish milky.
How much does it cost to re-sand and seal pavers?
A Jacksonville company publishes $1.75 to $3.25 per square foot for a clean, sand and seal, so the sand is part of that figure. If only the sand is replaced, a 2026 Jacksonville guide lists $0.25 to $0.75 per square foot. Check that sand appears in your quote.
How much does it cost to have pavers cleaned and sealed?
Plan on $1.75 to $3.25 per square foot around Jacksonville. For a 900 square foot Fort Caroline driveway, that is about $1,575 to $2,925. A failed old coat that must be stripped adds $0.75 to $1.50 per square foot.
How much does paver cleaning cost in Fort Caroline?
One Jacksonville company lists cleaning from $0.22 per square foot, so a 900 square foot driveway would start near $198. The final price turns on the size of the area, the kind of paver and any sand the joints need.
How often should shaded pavers near the river be cleaned?
Plan on once a year. Family Handyman says shaded pavers need a thorough cleaning annually, while sunny ones may need it only every few years. A Jacksonville company says river humidity keeps mildew coming back around east Arlington.
Why do my Fort Caroline pavers keep turning green?
Shade and damp air are what algae needs. East Arlington has mature trees and river humidity, and a Jacksonville company says mildew returns on the shady, damp side of homes. Sealing and a yearly cleaning slow it down.